# General parameters
general{
apps2sd=1	# this is useless here, require a modified a2sd script
CONF_FILE="/system/sd/user.conf"	#location of user.conf
media2sd=1	# moves the medias to sd if /system/sd/media exists
permission_fix=0 # perform permission fix at start up (this parameter sets to 0 after script is executed)
odex_auto=1	# perform auto create or del odex for applications installed or removed within 3 days
odex_apk=0	# creates odex for apk that does not have odex yet (this parameter sets to 0 after script is executed)
odex_all=0	# creates odexes for all apks (this parameter sets to 0 after script is executed)
}

#compcache related parameters
compcache{
compcache_en=0	# enable(1) or disable(0) compcache
cc_disksize=32	# Ram swap disksize - any number between 1 to 95 should work; default is 1/4 of the RAM (24)
cc_memlimit=16	# Limit the memory usage for backing swap (cc .5x known issue-defaults to 15% of total RAM)
cc_backingswap_en=0	# enable(1) or disable(0) backing swap
cc_backingswap=/dev/block/mmcblk0p3 # pointing to the backingswap partition device, swap
cc_swappiness=30 # default 60
}

#create swap file for compcache or linux swap
swap_file{
swap_file_en=0	# set to 1 to create swap file
				# set to 0 to del the swap file
linux_swap_file_size=32	# swap file size in MB
linux_swap_file=/system/sd/swap.file	# pointing to the swap file location ( must be /system/sd/)
}


#Linux swap parameters
#
# linux swap can only be enabled if cc_backingswap_en is set to "0"
#
linux_swap{
linux_swap_en=1	# enable(1) or disable(0) linux swap
linux_swap_partition=/dev/block/mmcblk0p3 # swap partition device
swappiness=60 # default 60
}

#virtual memory 
sys_vm{
sys_vm_en=0	# enable(1) or disable(0) virtual memory configurations
page_cluster=0	# default 3, (0 since CM3.9.6+)
laptop_mode=0	# default 0
dirty_expire_centisecs=3000	# default 3000
dirty_writeback_centisecs=500	# default 500
dirty_background_ratio=5	# default 5
dirty_ratio=10	# default 10
}

#cpu clock
proc_cpu{
proc_cpu_en=1	# enable(1) or disable(0) user cpu configurations
# freqency options
# 19200
# 122880
# 128000
# 245760
# 384000
# 528000
scaling_min_freq=245760	# default 245760
scaling_max_freq=528000	# default 528000
sampling_rate=2000000	# default 2000000 depending on kernel version
powersave_bias=200	# default 0,  (200 since CM3.9.6+ )
up_threshold=40	 # default 45, percent cpu usage before going up a speed step
}

# custom shell commands, these commands run last
custom_shells{
#echo "Hello!!!" # example
#echo "You can create your own cmmands here" # example
}