Version 3.6.1 Final (14.07.2011)
+ Added new keyword for the client IP address at the welcome message, just check out the welcomemessages.cfg file.
- Removed welcome message keyword %CLIENT_UNREAD_MESSAGES%, because Teamspeak Systems removed this information in TS3 server rc2.
- Smaller fixes at the welcome message creation.
o Changed version check server. No visible changes.

Version 3.6.0 Final (30.05.2011)
+ Added many new keywords for the welcome message, just check out the welcomemessages.cfg file.
+ Added server group settings to Bad Nickname Check. This allows to limit or ignore specified server groups from check.
+ Added channel ignore settings to the Bad Channel Name Check. This allows to set a list of channels which should not be checked.
+ Added start argument -version to display installed and latest bot version. Bot don't start with this argument.
o Updated readme file with more informations.
o Added the following config values to the bot config file:
  badnickname_group_list, badnickname_group_list_mode, badchannelname_channel_list

Version 3.5.2 Final (30.03.2011)
- Bugfix: Small fixes at the used query library.
o At some situations better error messages will be created.

Version 3.5.1 Final (12.03.2011)
+ Added new chat command !listinactiveclients for bot admins to display clients which are inactive for at least X days.
- Bugfix: Warning message for to long welcome messages may be wrong. Should now work as intended.
- Bugfix: Small fixes at the used query library.

Version 3.5.0 Final (13.02.2011)
+ Chat command !botinfo displays now your bot admin permission level.
- Bugfix: Sometimes the warning messages was shown if the messages are not to long.
- Bugfix: Checking for message length could prevent bot from starting in some cases.

Version 3.5.0 Beta 2 (10.02.2011)
+ Added warning messages if a chat, poke or kick message is to long.
  This should help you to find the reason for some problems.

Version 3.5.0 Beta 1 (07.02.2011)
+ Away Mover and Mute Mover now allow setting a server group list and an optional message.
o Some changes to the !botcfgget and !botcfgset commands (better answers from bot).
o Added the following config values to the bot config file:
  away_group_list, away_group_list_mode, away_message_mode, away_file,
  mute_group_list, mute_group_list_mode, mute_message_mode, mute_file
o Changed names of the following config values at the bot config file:
  ts3_server_login to ts3_server_query_login
  ts3_server_password to ts3_server_query_password
  ts3_channel_id to bot_channel_id

Version 3.4.4 Final (04.02.2011)
- Closed one big security issue!
- Bugfix: Wrong idle times from TS3 server don't make the bot crazy.

Version 3.4.3 Final (13.12.2010)
+ Added better error messages if something is wrong with the config files.
+ Added support for loading UTF-8 files with BOM (not fully tested).
o Small updates to the readme files.

Version 3.4.2 Final (10.12.2010)
o Security change: All additional config files need a special first line or the config file will not be loaded.
  Usefull for hosters of bots to allow creating config files by the customers without any security problems.
  You can still use your old files, but you have to add the first line from the default config files.
o Away Mover Delay allows now values up to 1000 seconds.

Version 3.4.1 Final (05.12.2010)
+ Added script to install the bot as Windows Service, look into the readme file for this.
- Bugfix: Make sure that I catch all errors and write them to logfile.
o If the whole bot process will be stopped by a virtual bot instance,
  the reason will be also written into the InstanceManager.log file.
o Updated documentation with instructions how to run the bot.

Version 3.4.0 Final (25.10.2010)
- Bugfix: Small fixes to the !botsrvgrpprotadd and !botsrvgrpprotremove chat commands.
- Bugfix: Small fix for !bothelp command at the log file.
o Added better bot start messages for the welcome message and connection problems.
o Reduced timeout to 10 seconds if the TS3 server don't send an answer (TS3 server pre beta 30 bug).
  It is still impossible to use this bot on a pre beta 30 server, but you get the error message faster.

Version 3.4.0 RC 2 (17.10.2010)
+ It is now also possible to select the channels or server groups, which should be checked only.
  In older versions it was only possible to ignore the selection. Now you can choose what you like.
+ Added keyword for the server group id to the server group protection message.
- Bugfix: Using !botcfgsave on Windows no longer create weird looking config files.
o Added the chat command !h as a short alias for !bothelp.
o Permission list will now be cached directly after login.
o More informations for Linux users in the readme file.
o Renamed the following config keys in the bot config file:
  record_ignore_channels to record_channel_list
  record_ignore_groups to record_group_list
  idle_ignore_channels to idle_channel_list
  idle_ignore_groups to idle_group_list
  away_ignore_channels to away_channel_list
  mute_ignore_channels to mute_channel_list
o Added the following config keys in the bot config file:
  record_channel_list_mode, record_group_list_mode, idle_channel_list_mode, idle_group_list_mode,
  away_channel_list_mode, mute_channel_list_mode

Version 3.4.0 RC 1 (10.10.2010)
+ New chat commands for bot admins: !botjoinchannel, !botsrvgrpprotadd and !botsrvgrpprotremove

Version 3.3.8 Final (10.10.2010)
+ If a permission is missing, the permission name will be written into the log file, if possible.
o Small updates to readme file and bot error messages.

Version 3.3.7 Final (28.09.2010)
- Bugfix: Complain was not added if someone was kicked after start recording. (thx to Thomas Z.)

Version 3.3.6 Final (27.09.2010)
- Bugfix: Small error releated to the mute mover was fixed.
- Bugfix: Better error messages on bad config files.
- Bugfix: Fixed NullPointerException if stopping virtual bot instance while connecting with slow mode enabled.
o Added permission id to logfile output, if a missing permission is reported by the TS3 server.

Version 3.3.5 Final (11.09.2010)
+ Some features can now add a complain to the user, if enabled.
  This allows the server admin to see violating clients at the complain list window.
  IMPORTANT: Do not use this feature on servers older than beta 28,
             or it can break your complain system, if the bot login as serveradmin.
o Startup messages writes more informations about the enabled features.
o Added new optinal config values: record_add_complain, badnickname_add_complain and servergroupprotection_add_complain
  Look into the documentation or default config file to get more informations about it.

Version 3.3.4 Final (04.09.2010)
o Server Group Protection now writes an error message into the log, if something is going wrong. (thx to TotoIsBack)
o Slow Mode is now more slower at connection (takes up to 16 seconds to connect now).
  Should now work with stronger Anti-Flood protection settings of the TS3 server.
  
Version 3.3.3 Final (17.08.2010)
o Bot replace now for incoming chat messages the wrong space char from TS3 client history with the normal space.
o Some small changes to the reconnect / disconnect code.

Version 3.3.2 Final (10.08.2010)
o Changed the connecting order, now the bot login first after connection.
o Some small changes at the log output.

Version 3.3.1 Final (03.08.2010)
o Some additions to the readme files.
o No changes at the bot, only version bump.

Version 3.3.1 RC 3 (02.08.2010)
- Bugfix: Idle warning message will be sent only once again. (thx to etonline)

Version 3.3.1 RC 2 (31.07.2010)
- Bugfix: Idle second message was not found, if enabled. (thx to Slater)

Version 3.3.1 RC 1 (30.07.2010)
+ Added new chat command: !botinstancelistreload
  This reloads the instances. New loaded instances will be not started, use !botinstancestart for this.
+ Added new values for the Mute Mover, can now move if headphone or microphone hardware is disabled.
o 2 new config values was added to JTS3ServerMod_server1.cfg (mute_move_headphone_hardware and mute_move_microphone_hardware), see default config file.

Version 3.3.0 (29.07.2010) - Many bugs introduced here, do not use this version!
+ Added settings to many places to allow you to choose how a message will be shown at the client (poke, chat or no message).
- Bugfix: Config value servergroupprotection_kick was not read, this is now fixed.
- Bugfix: Implemented an error message if the bad channel name check is unable to get the channel list. (thx to TotoIsBack)
o 6 new config values was added to JTS3ServerMod_server1.cfg (for the message modes), see default config file.

Version 3.2.6 (26.07.2010)
+ Added setting to disable the server group protection kick, added config value servergroupprotection_kick for this.
o Added "bot successful started" message to console and log file.
o Updated documentation to make some things clear.
o Config value servergroupprotection_kick added to JTS3ServerMod_server1.cfg, see default config file.

Version 3.2.5 (13.07.2010)
- Bugfix: Fixed small bug at the chat commands !lastseen and !clientsearch (now case insensitive). (thx to MajorThorn)

Version 3.2.4 (09.07.2010)
- Bugfix: Fixed small bug while handle welcome message for a disconnected client. (thx to Slater)

Version 3.2.3 (30.06.2010)
- Bugfix: Fixed some bugs at the log output. (thx to Slater)

Version 3.2.2 (30.06.2010)
- Bugfix: Idle Check don't send warning messages to ignored server group members anymore. (thx to Mikobiko)

Version 3.2.1 (22.06.2010)
o Config value command_exec removed from instance config and moved to new value bot_command_exec in InstanceManager.cfg file.

Version 3.2 Final (18.06.2010)
+ Added feature to server group protection: If wanted, this feature adds missing server groups to client.
- Bugfix: Corrected the output of some logfile entries.
o Added new option servergroupprotection_add_missing_groups to JTS3ServerMod_server1.cfg, see default config file.

Version 3.1.1 Final (08.06.2010)
+ Added new option: Slow Mode
o Added more informations to the readme.txt file
o Bot writes more informations if something is wrong with the config file.
o Added optional value bot_slowmode to JTS3ServerMod_server1.cfg, see default config files.

Version 3.1 Final (23.05.2010)
+ Added a new help file in english and german language. Also translated the readme.txt into german language.
o Corrected some informations in the config files.

Version 3.1 RC 2 (16.05.2010)
o Changed loading of JTS3ServerMod_InstanceManager.cfg file, now a gab of 10 numbers in the consecutive numbering is allowed.

Version 3.1 RC 1 (14.05.2010)
+ Added a second type of bot admin. The full admin is the same as before and is set in the instance manager config file now.
  The bot admin set in the server config file of the bot just allow bot commands which affect only the own bot instance.
o More informations in the log file, if an error occur.
o Added optional value bot_fulladmin_list to JTS3ServerMod_InstanceManager.cfg file, see default config files.

Version 3.0.2 Final (30.04.2010)
o More flexible with numbers in config files (removes spaces).

Version 3.0.1 Final (29.04.2010)
- Bugfix: Bad log entries of the Mute Mover.

Version 3.0 Final (23.04.2010)
o No changes since RC 8.

Version 3.0 RC 8 (22.04.2010)
+ New Feature: Mute Mover, can move clients if microphone or headphone is muted.
o Some values added at the bottom of the config file. Look into standard config file.

Version 3.0 RC 7 (17.04.2010)
+ Added minimum client count to idle check.
o Added value idle_min_clients to the idle check block in the config file.

Version 3.0 RC 6 (14.04.2010)
o Updated the Server Query Library, which improve the detection if the bot is still conntected to the TS3 server.

Version 3.0 RC 5 Hotfix (14.04.2010)
- Bugfix: Telnet clients was still reported by !lastseen as online. (thx to sojakfa)

Version 3.0 RC 5 (14.04.2010)
o The client database cache (used for !clientsearch and !lastseen) does only update real clients and no telnet users.
  Suggested by sojakfa.

Version 3.0 RC 4 (12.04.2010)
+ New Chat Command: !botversioncheck displays the latest final and development version (bot needs internet access for this).
- Removed helptext about removed chat commands from !bothelp chat command.

Version 3.0 RC 3 (11.04.2010)
- Bugfix: Chat command !botcfgsave and !botreload was not working anymore, if advertising feature was enabled. (thx to Megamaluco)
- Bugfix: Advertising feature shows wrong interval in minutes on shell / cli window and log file. (thx to Megamaluco)
- Bugfix: Some log file entries missed some informations.
o Second exe file to start the bot for Windows users, but without a visible window (java runtime still needed).

Version 3.0 RC 2 (10.04.2010)
+ Improved: Chat command !botcfghelp can now display config keys which start with specified characters.
            Example: !botcfghelp bot
			This will display all config keys starting with the word bot.

Version 3.0 RC 1 (10.04.2010)
- Bugfix: !botcfghelp command works now again.
- Bugfix: !botcfgreload did not work correctly.

Version 3.0 Beta 3 (09.04.2010)
+ New Feature: Server Group Protection
+ New Chat Command: !botcfgreload to reload one of the special config files (advertising, idle, welcome, etc.).
- Removed: Chat command !botadvmsgreload replaced with "!botcfgreload advertising".
o Some values added at the bottom of the config file, one new config file also added. Look into standard config file.

Version 3.0 Beta 2 (08.04.2010)
- Bugfix: Fixed !botreload command (thx to Slater)

Version 3.0 Beta 1 (07.04.2010)
+ New Feature: Bad Nickname Check, which uses regular expressions.
+ New Feature: Bad Channel Name Check, which uses regular expressions.
o Some internal changes to make sure that there is no XServer call on operating systems without graphical user interface. (thx to HoschY1987)
o Some values added at the bottom of the config file, two new config files also added. Look into standard config file.

Version 2.1 Final (02.04.2010)
- Bugfix: Advertising to server chat did not work if virtual server got selected by port. (thx to mastermax)

Version 2.1 RC 3 (20.03.2010)
- Bugfix: New line (\n) was not displayed in messages correctly (thx to Heiko).
o Important: Don't save the messages files in unicode with BOM, it will not work.
             Just use unicode without BOM and the UTF-8 encoding will work.

Version 2.1 RC 2 (18.03.2010)
o All messages are now in external files, which can be loaded with a different character encoding.
  Default encoding for messages files is now UTF-8, which can be changed in config file.
o Many config file changes, please take a look on the default config files.

Version 2.1 RC 1 (18.03.2010)
- Bugfix: advertising.cfg will be now loaded with encoding ISO-8859-1 like the other bot config files.
          This should solve the wrong display of special characters.

Version 2.0 Final (12.03.2010)
o No changes since RC 1.

Version 2.0 RC 1 (09.03.2010)
+ New: Chat command !botreloadall - Reloads all bot instances (without checking config files).
o Internal changes and optimizations. The bot needs now TS3 server beta 19 or newer for record check.
  The advantage: Bot needs now much less telnet commands to do the work.

Version 2.0 Beta 7 (01.03.2010)
+ New: Second idle message as kick reason after being idle for longer than idle_second_max_time.
- Bugfix: Some smaller bugfixes at all idle check features.
o Config changes: New argument idle_second_message, look into the default config file.

Version 2.0 Beta 6 Hotfix (28.02.2010)
- Bugfix: Second idle time kick was not working.

Version 2.0 Beta 6 (28.02.2010)
+ New: Idle mover got a new argument to kick after a second idle time.
- Bugfix: Fixed some bugs with !execwait
o Config changes: New optional argument idle_second_max_time, look into the default config file.

Version 2.0 Beta 5 (27.02.2010)
+ New: Define now many advertising messages in a file.
+ New: Chat Command !botadvmsgreload to reload advertising messages file without reconnect bot.
- Bugfix: !exec and !execwait was not working, this is now fixed.
o Exe file to start the bot for Windows users (java runtime still needed)
o Config files by default now in a config directory.
o Config file changes: advertising_message removed, advertising_file added.  Look into the default config!

Version 2.0 Beta 4 (26.02.2010)
- Bugfix: Idle warn message and idle move was not working correct if idle_check_enable was set to 2 (thx to DarRoe)

Version 2.0 Beta 3 (25.02.2010)
+ New: Away mover can now move back, if away_check_enable is set to 2
+ New: Chat command !clientsearch for bot admins, which works like the !lastseen command, but outputs more informations about the client.

Version 2.0 Beta 2 (24.02.2010)
+ New feature: Chat command !exec and !execwait - Bot admin can execute a system command, can be enabled in config file.
+ New: Client database cache for commands like !lastseen. This makes this commands much faster on big servers.
+ New: Now its possible to change the away move delay in config file.
+ New: Idle check can now also kick and ignore server groups.
o Bot will now disconnect clean from Teamspeak server on system shutdown or when sending CTRL + c to bot process.
o Added config values: bot_clientdblist_cache, command_exec, idle_ignore_groups and away_move_delay. Look into the default config!
IMPORTANT: Config value idle_check_enable has changed. Look into the default config!

Version 2.0 Beta 1 (22.02.2010)
+ New feature: Chat command !msgchannelgroup   - Sends a message to all online clients with this channel group.
+ New feature: Chat command !msgservergroup   - Sends a message to all online clients with this server group.
+ New feature: Chat command !removechannelgroups  - Change all channel groups of a client to the default channel group.

Version 1.0 Final (21.02.2010)
- Bugfix: If a start error in a bot instance occurred, the whole bot process quits. This is now changed, only the bot instance stops working.
o The instance manager checks now if the config file exists. If not, a special error message will be displayed.
o Changed the text output on the command line.

Version 1.0 RC 5 (19.02.2010)
+ New feature: Chat command !lastseen to see somebody's last online time. Possible to disable this for public use.
+ New: Bot Instance Manager, start many bot instances for different Teamspeak 3 servers with one bot process.
+ New: Admin chat commands !botcfghelp, !botcfgget, !botcfgset, !botcfgcheck, !botcfgsave, !botinstancestart, !botinstancestop and !botinstancelist
+ New: !bothelp  can now display an info text about a command.
- Bugfix: Default welcome message did not work if the second welcome message is disabled. (thx to DarRoe)
o Added connect message, if the connection to Teamspeak server is successful.

Version 1.0 RC 4 (17.02.2010)
+ New: Now its possible to use the virtualserver port to select the virtual server.
- Bugfix: Record kick did not work since 1.0 RC 2, this is now fixed. (thx to DarRoe)
o Config key name ts3_server_port changed to ts3_server_query_port to avoid confusion.

Version 1.0 RC 3 (17.02.2010)
+ New feature: Second welcome message for specified server groups.
+ New: More keywords for the welcome message, like the unread offline message count.
+ New: Change date pattern for welcome messages and future date formatting on chat commands.
+ New: If enabled, the bot can try to connect to an offline Teamspeak 3 Server forever.
+ New: You can choose a second server query name, if the first name is already in use.
- Bugfix: Bot do not quit now if only the bot name is already in use.

Version 1.0 RC 2 (16.02.2010)
+ New: Exclude Server Group members from record check
+ New: Shows bot uptime on !botinfo
- Bugfix: Start errors was not written to logfile.
o Bot now also checks if channel IDs in config file exists. If not, bot shows a warning and disables feature.

Version 1.0 RC 1 (15.02.2010)
+ New feature: Idle warning message
+ New feature: Auto away mover
- Bugfix: !botreload did not work.
- Bugfix: Auto reconnect did not work in every cases.
o Changed and completed status output on console and logfile.

Version 1.0 Beta 3 (14.02.2010) - Not released
+ New feature: Welcome Message
+ New feature: Server commands like !botinfo and !bothelp
+ New feature: Bot can switch to a channel on connection.
+ New feature: Bot reconnects automatically after some time, if connection lost.
o Changed config loading again, now more failsave and better error messages.

Version 0.9.1 Beta 2 (11.02.2010)
+ Selected channels can be ignored for idle and record check.
+ New feature: Advertising
o Changed config loading, only needed values will be loaded.

Version 0.9 Beta 1 Hotfix (11.02.2010)
o Just updated the ServerQuery library, which do not generate more warnings in the Teamspeak 3 server log.

Version 0.9 Beta 1 (11.02.2010)
- First public Beta version